2WA/2NJ/2RK
4-200
(8-1) Detaching and reattaching the operation panel PWB
Procedures
1. Tilt up the operation unit (a).
2. Remove the screw (b)(M3x8) and
remove the operation rear cover (c) in
the direction of the arrow.
Figure 4-300
3. Remove one screw (a)(M3x8).
4. Remove the operation lid (c) from the
operation unit (b) in the direction of the
arrow.
Figure 4-301
c
b
a
14j0214
b
a
c
14j0432
To Next Page
Loading...
