Kyocera TASKalfa 8002i - Page 527

2WA/2NJ/2RK
4-199
24. Disconnect two connectors (a).
25. Remove one screw (b)(M3x8) and
remove the duct (c).
Figure 4-298
26. Remove eight screws (a)(M3x8).
27. Release the board support (b) and
remove the IH PWB (c).
28. Check or replace the IH PWB (c) and
then reattach the parts in the original
position.
Figure 4-299
b
c
a
a
14j0430
b
c
a
a
a
a
14j0431