Kyocera TASKalfa 8002i - (1-7) Detaching and reattaching the front right cover; (1-8) Detaching and reattaching the ISU right cover, right upper cover and right middle rear cover

2WA/2NJ/2RK
4-81
(1-7) Detaching and reattaching the front right cover
Procedures
1. Pull out the conveying unit (a).
2. Remove three screws (b)(M3x8).
3. Release three hooks (c) and remove
the front right cover (d).
Figure 4-113
(1-8) Detaching and reattaching the ISU right cover, right upper cover and right
middle rear cover
Procedures
1. Tilt up the operation unit (a).
2. Remove the screw (b)(M3x8) and
remove the operation rear cover (c) in
the direction of the arrow.
Figure 4-114
b
a
14j0213
1
2
b
c
d
c
c
d
c
b
a
14j0214