2WA/2NJ/2RK
3-97
(5-5) Bundle eject operation
1st sheet
1. By rotating the middle roller (a), paper is
conveyed to the process section.
Paper is conveyed to the DF tray A (c)
by the DF tray A eject roller (b).
2. The conveying guide (d) descends
when the paper trailing edge passes the
middle roller (a). Then, the DF tray A
eject roller (b) is rotated reversely and
paper is sent to the adjusting tray (e).
3. Then, the conveying guide (d) ascends
and the bundle eject unit (g) ascends
by the DF eject release motor (f) drive.
By rotating the DF tray A eject roller (b)
and adjusting paddles (h), paper is
conveyed to the adjusting tray (i).
The DF side registration motor 1,2 (j)
drive the adjusting guides (k) to adjust
paper.
Figure 3-87
d
d
a
a
b
c
b
e
f
g
b
h
i
j
k
To Next Page
Loading...
