2WA/2NJ/2RK
4-230
(2-3) Detaching and reattaching the PF lift motor
Procedures
1. Remove the rear cover.
2. Disconnect each the connector (a).
3. Remove each two screws (b)(M3x8)
and then remove the PF lift motor 1 (c)
and the PF lift motor 2 (d).
4. Check or replace the PF lift motor and
then reattach the parts in the original
position.
Figure 4-352
c
d
c,d
14j0536
To Next Page
Loading...
