2WA/2NJ/2RK
4-224
(1-2) Detaching and reattaching the PF drive unit
Procedures
1. Remove the rear cover.
2. Remove the right cover.
3. Disconnect each the connector (a).
4. Remove each two screws (b)(M3x8)
and then remove the PF lift motor 1 (c)
and the PF lift motor 2 (d).
Figure 4-340
5. Disconnect two connectors (a).
6. Release two wire saddles (b) and
remove the wire.
Figure 4-341
a
b
c
d
c,d
14j0524
a
b
b
a
14j0525
To Next Page
Loading...
