2WA/2NJ/2RK
4-210
4. Disconnect all the connectors from the
DP main PWB (b).
5. Remove two screws (a)(M3x8).
6. Detach the DP main PWB (b) from the
document processor (c).
7. Check or replace the DP main PWB (b),
and then reattach the parts in the origi-
nal position.
Figure 4-318
(10-4) Detaching and reattaching the CIS
Procedures
1. Open the DP top cover (b) of the docu-
ment processor (a).
2. Detach the Strap (c) from the DP top
cover (b).
Figure 4-319
a
a
b
c
14
0506
b
a
c
14j0504
To Next Page
Loading...
