Kyocera TASKalfa 8002i

2NJ/2RK
2-120
(9-4) In case of Side Paper Feeder (PF-7120)
Cassette heater installation requires the following parts:
Cassette heater 100 set (303RL9404_) 1 pc
Cassette heater 120 set (303RL9405_)
Cassette heater 240 set (303RL9406_)
Bundled parts of cassette heater 100/120/240 set
Cassette heater 100 assembly 1 pc
Cassette heater 120 assembly
Cassette heater 240 assembly
Wire saddles *12 pcs
Edge saddle 1 pc
Screws (M3x8 with the binding head) 2 pcs
*1 Wire saddles 1 pc is not used.
Procedures
(Side Paper Feeder side)
1. Turn the power switch off and disconnect the power plug.
2. Remove the connector of the paper feeder at the main unit side.
3. Remove four screws (a) (M3x8) and then remove the rear cover (b).
Figure 2-226
4. Pull out the cassette (a),
Figure 2-227
a
b
a
a
a
a