Kyocera TASKalfa 8002i

2WA/2NJ/2RK
4-35
(4-3) Detaching and reattaching the drum unit
Procedures
1. Remove the inner unit. (Refer 1-4-30)
2. Remove the developer unit (a). (Refer
1-4-33)
3. Pull out the conveying unit (b).
4. Disconnect the connector (d) of the
drum unit (c).
5. Remove the screw (e).
Figure 4-43
6. Remove the drum unit (a).
7. Check or replace the drum unit (a) and
then reattach the parts in the original
position.
Figure 4-44
d
c
c
e
c
b
a