Kyocera TASKalfa 8002i

2WA/2NJ/2RK-1
3-88
(4) Paper feeder (PF-7130)
(4-1) Cassette paper feed section
The feeder assembly contains a mechanism to feed paper picked up from the cassette into the printingdevice.
When feeding from the paper feeder, the paper is passed on through the vertical paper feederassembly, then
the feeding roller and feeding pulley as they rotate, finally to the main unit. The multi feed sensor is provided
to detect more than one sheet of paper are fed at one time. The PF feedshift solenoid activates the PF feed-
shift guide so that the excessive sheet(s) of paper is diverged and set aside by means of the eject rollers as
they rotate into the eject tray.
Figure 3-75
7
5
4
2
3
9
1
23
6
8
11
10
18
7
5
4
2
3
9
32
16
1
23
6
8
11
10
18
13 35
12
29
3114
24
25
22
19
20
21
272815 30
33
34
17
26
1. PF forwarding pulley
2. PF paper feed pulley
3. PF separation pulley
4. PF assist roller
5. PF assist pulley
6. PF conveying roller 1
7. PF conveying pulley
8. PF conveying roller 2
9. PF conveying pulley
10. PF conveying roller 3
11. PF conveying pulley
12. PF eject roller
13. PF eject pulley
14. PF conveying roller 4
15. PF conveying pulley
16. PF conveying roller 5
17. PF conveying pulley
18. PF conveying pulley
19. PF paper feed sensor
20. PF paper sensor
21. PF lift sensor
22. PF upper paper gauge sensor
23. PF lower paper gauge sensor
24. PF paper width switch
25. PF paper length switch
26. PF multi feed sensor
27. PF conveying sensor 1
28. PF conveying sensor 2
29. PF conveying sensor 3
30. PF eject sensor
31. PF feedshift guide
32. Cassette operation plate
33. Lift operation plate
34. Cassette 5
35. Eject tray