Kyocera TASKalfa 8002i

2WA/2NJ/2RK
3-46
(2) Large capacity feeder
The paper feeder is comprised of the right- and left-hand cassettes and their feeding units, and the paper
feeding section for the left-hand cassette.
The paper loaded on the lifting plate in the right-hand cassette is picked up to one by one by PF forwarding
pulley, PF feeding pulley and PF separator pulley. And then PF feed roller 1 feeds the paper into the main unit.
The paper fed by the left-hand cassette is separated in the similar manner and fed out by the conveying roller
into the main unit.
Right cassette section
Figure 3-30
13
14 15
16
6
7
13
12
3
10
11
14
2 17
4
5
8
9
1
1. PF forwarding pulley
2. PF paper feed pulley
3. PF separation pulley
4. PF paper feed roller 1
5. PF paper feed pulley
6. PF paper size detection switch 1
7. PF cassette detection switch 1
8. PF upper paper gauge sensor 1
9. PF lower paper gauge sensor 1
10. PF paper sensor 1
11. PF lift sensor 1
12. PF paper feed sensor 1
13. PF conveying roller
14. PF conveying pulley
15. PF conveying sensor 2
16. PF conveying unit switch
17. PF conveying cover switch