2NJ/2RK
2-111
(9-2) In case of Paper Feeder (PF-730(B))
Cassette heater installation requires the following parts:
Cassette heater 100 set (303NJ9406_) 1 pc
Cassette heater 120 set (303NJ9407_)
Cassette heater 240 set (303NJ9408_)
Bundled parts of cassette heater 100/120/240 set
Cassette heater 100 (302H74507_) 1 pc
Cassette heater 120 (302H74509_)
Cassette heater 240 (302H74508_)
High temperature caution label 1 pc
Wire saddles 3 pcs
Screw (M4x8 S-tite)3 pcs
Connector cover 1pc
Procedures
1. Turn the power switch off and disconnect the power plug.
2. Pull out the upper cassette (a) from the paper feeder (b) and
remove it in the direction of the arrow.
Figure 2-214
3. Pull out the lower cassette (a) from the paper feeder (b) and remove it in the direction of the arrow.
Figure 2-215
a
b
a
To Next Page
Loading...
