Kyocera TASKalfa 8002i

2WA/2NJ/2RK
9-10
9-3 Inner Cleaning
(1) Cleaning the paper conveying plate
*: If toner is observed at the edge of the paper conveying guide.
Procedure
1. Pull out the conveying unit (a).
2. Clean the side of the paper conveying
plate (b), which paper runs through.
*: Use a dry, soft cloth for cleaning.
Figure 9-1
(2) Cleaning the rear transfer guide
Procedure
1. Pull out the conveying unit (a).
2. Clean the side of the rear transfer guide
(b), which paper runs through.
*: Use a dry, soft cloth for cleaning.
Figure 9-2
a
b
19j0107
a
b
19j0109