Kyocera TASKalfa 8002i

2WA/2NJ/2RK
4-26
(3) Transfer section
(3-1) Detaching and reattaching the conveying unit
Procedures
1. Pull out the conveying unit (a).
2. Remove three screws (b)(M4x8).
3. Release three hooks (c) and remove
the front right cover (d).
Figure 4-29
4. Release two hooks (a). And then
remove the conveying inner cover (b)
from the conveying unit (c).
Figure 4-30
b
a
1
2
b
c
d
c
c
d
a
c
b
a