2WA/2NJ/2RK-2
2-43
(16-2) Network Setup (LAN Cable Connection)
TCP/IP (IPv4) Settings
Set up TCP/IP (IPv4) to connect to the Windows network.
The default settings are as follows.
• TCP/IP: On
• DHCP: On
• Auto-IP: On
• IP Address: 0.0.0.0
• Subnet Mask: 0.0.0.0
• Default Gateway: 0.0.0.0
Setting procedures
1. Select [System Menu/Counter] key or [System Menu] key > [System/Network] > [Network] > [TCP/IP Setting] >
[Wired Network Settings] > [TCP/IP Setting].
2. Select [IPv4] for setting.
When using DHCP server
[DHCP]: set to [On]
When setting the static IP address
[DHCP]: set to [Off]
[IP Address]: Enter the address.
[Subnet Mask]: Enter the address.
[Default Gateway]: Enter the address.
[Auto IP]: set to [Off]
When setting Auto IP, set the IP address to 0.0.0.0.
3. Restart the network from System Menu, or turn the power off and then on waiting 5 seconds or more.
*: The factory default login user name and login password are set as shown below.
(16-3) Paper size and media type setting
1. Select [System Menu/Counter] key > [Cassette/
MP tray Settings].
2. Select [Cassette 1 (- 7) ] or [MP Tray Setting].
3. Select [Paper Size] and [Media Type] to set them.
(17)Installing Software
Install appropriate software in your PC from the bundled DVD (Product Library) if you want to use the printer function of
this machine or perform TWAIN / WIA transmission or Network FAX transmission from your PC. (See the Operation
Guide supplied with the main unit)
Model Name 70 ppm
model
80 ppm
model
90 ppm
model
Login User Name 7000 8000 9000
Login Password 7000 8000 9000
To Next Page
Loading...
