Kyocera TASKalfa 8002i

2WA/2NJ/2RK
7-573
(14)Print output is unavailable due to the network factor
The router is faulty, or the router settings are incorrect.
(15)Print output is unavailable due to the network factor
"Offline" appears and the print function is unavailable.
2 Checking the Ethernet
cable
The Ethernet cable is not
properly connected.
In case the link lamp is off,
once disconnect the Ether-
net cable from the router and
reconnect it to check the link
lamp is lit.
3 Checking the Ethernet
cable
The Ethernet cable is
faulty.
Replace the Ethernet cable.
4 Restarting up The router, HUB, PC or the
main unit do not start up
properly.
In case of no connection
while the link lamp is lit,
restart the router or hub and
then restart up the PC and
the main unit.
Step Check description Assumed cause Measures Reference
1 Checking the settings The IP address is not prop-
erly set.
Check if the main unit IP
Address indicated in the sta-
tus page is the same as the
IP Address in the [Port] tab of
[Printer Properties] at the PC.
If not, correct the IP address
at the PC
?
2 Checking the settings The printer host name is
not properly set.
Check the printer host name
by printing out the status
report when there is a server
environment. Then, check the
printer host name at the [Port]
tab in the printer properties at
a PC. If they differ, correct the
printer host name.
Step Check description Assumed cause Measures Reference
1 Checking the network There is trouble in the net-
work.
Check the internet connec-
tion and restore the network
connection if necessary
2 Restarting up The PC malfunctions. When "Offline" appears on
the printer driver, check if it is
used in the pause or offline.
Then, restart up the PC.
Step Check description Assumed cause Measures Reference