2NJ/2RK
2-5
(1-2) Take out of the machine unit
Take out the main unit and accessories from the packing case.
*: When taking out of the machine unit, it needs about
2m spaces behind the machine.
1. Detach the hinge joint, remove outer case, inner
case, left upper/right pad, left/right stay, front pad,
upper spacer and bottom spacer.
2. Cut the fixed tape of the skid corner.
3. Cut the tape(a) fixing the slope and left bottom/
right pad.
Figure 2-3
4. Rotate a slope(a) as the diagram and change the
slope for the machinery travelling
Figure 2-4
a
a
a
a
To Next Page
Loading...
