2WA/2NJ/2RK
7-91
(3) Jam Codes
Error code Contents note
J0000 Power ON jam
J0100/J0101/J0102/
J0103/J0104/J0106/
J0108/0200
Paper jam caused by the pro-
cess time time-out
J0100: Secondary feed, J0101: Imaging process,
J0102: Toner supply, J0103: Image consistency,
J0104: Paper conveying, J0106: Duplex feed,
J0108: Option, J0200: Main unit sequence
J0107 Paper jam detection caused
by fuser temperature stabiliza-
tion time-out
J0110/J0112/J0113/
J0114/J0115/J0210
Cover open detection J0110: Paper conveying unit open detection
(Conveying unit switch), J0112: Duplex cover
open detection (Duplex cover switch), J0113:
Paper conveying cover open detection (Paper
conveying cover open / close switch), J0114: BR
conveying unit open detection (BR conveying unit
switch), J0115: BR eject cover open detection
(BR eject cover switch), J0210: PF paper convey-
ing cover open detection (PF conveying cover
open / close switch)
J0131 MP lift sensor upper limit
detection
J0132 Rotary decurler guide error
J0211/J0212/J0214 PF conveying cover / PF top
cover open detection (Side
multi feeder), PF conveying
cover open detection (Paper
feeder / Large capacity
feeder)
Object: Side multi feeder + Paper feeder, or Side
multi feeder + Large capacity feeder
J0213 Side feeder release detection Object: Side feeder
J0215 Side multi feeder release
detection
Object: Side multi feeder
J0300 Paper eject completion non-
detection jam
Object: 4000-sheet finisher
J0501/J0502/J0506/
J0507/J0523/J0524/
J0525/J0526/J0527
No paper feed Prior checking item when no paper feed occurs.
J0501/J0502 No paper feed from the cas-
sette
Condition: the paper does not reach the feed pul-
ley.
J0501/J0502 No paper feed from the cas-
sette
Condition: The paper stops at the feed pulley.
J0501/J0502 No paper feed from the cas-
sette
Condition: The paper leading edge passes the
feed pulley.
J0523/J0524 No paper feed from the large
capacity paper feeder
To Next Page
Loading...
