Kyocera TASKalfa 8002i

2WA/2NJ/2RK
4-259
(2-8)PH-7A/7B/7C/7D
CH:Check / CL:Clean / AD:Adjust / LU:Lubrication / RE:Replace
*:If replaced at check, return to the original maintenance at the next maintenance. If not replaced at check, check again at the next maintenance.
Parts name Parts No.
PM maintenance (x1000 counts) Remark
Set up User call *
*Based on the main
installation
Please do not use spray containing flammable gas for air-blow or air-brush purposes.
A<Drive>
1 GEAR 40 CAM DRIVE 3H416110 LU LU: Apply EM-50LP to gear teeth surface
(PN 7BG010009H GREASE MOLYKOTE EM-50LP 50G)
2 GEAR 16-51 IDLE 3H416120 LU LU: Apply EM-50LP to gear teeth surface
(PN 7BG010009H GREASE MOLYKOTE EM-50LP 50G)
3 PARTS MOTOR-PM MOVING SP 303NB94040 LU LU: Apply EM-50LP to gear teeth surface
3NB94040 (PN 7BG010009H GREASE MOLYKOTE EM-50LP 50G)
B <Sensors>
1 SENSOR FEED B 303H327500 CL CL: Air blowing or dry cloth
3H327500