Kyocera TASKalfa 8002i

2WA/2NJ/2RK
4-201
5. Disconnect three connectors (b) from
the operation unit (a).
6. Detach the wire guide (c).
7. Remove two screws (d)(M3x8).
Figure 4-302
8. Tilt down the operation unit (a).
9. Remove the screw (b)(M3x8) and
remove the operation right cover (d).
Figure 4-303
b
c
a
d
d
14j0433
c
b
a
14j0434