2NJ/2RK
2-30
2.Match to usable paper size and then insert the groove (the bottom of the tray) which fix the paper size guide A(a).
Figure 2-54
Check if the top of paper size guide A(a) matches the usable paper size, install the fixed material(b) and lock turning.
Move slightly, check that the paper size guide is fixed.
3.With the bottom side of the tray pushing down to the lowest, pushing to detach the hook that there is the side of the
paper size guide B(c), pull out it.
Figure 2-55
4.Match the paper size and then adjust the paper size guide B(c).
D
E
To Next Page
Loading...
