Kyocera TASKalfa 8002i - Page 80

2NJ/2RK-1
2-31
In the case of A4
Insert the paper size B(c) into the A4 marking groove (the bottom of the tray) and then fix the hook.
(When the hook is fixed, it snaps.)
Move slightly, check that the paper size guide is fixed.
Figure 2-56
Inch model (Letter → A4)
Assemble the paper size guide B (c).
(Insert the shaft of CURSOR END SUB (B) into the hole of CURSOR END DECK (A) and turn it down.)
Insert the paper size guide B(c) into the A4 marking groove (the bottom of the tray) and then fix the hook.
(When the hook is fixed, it snaps.)
Insert the paper size guide B(c) into the groove (the bottom of the tray) and then fix the hook.
(When the hook is fixed, it snaps.)
Move slightly, check that the paper size guide is fixed.
Figure 2-57
F
G
F
F
F
G
A
B