2WA/2NJ/2RK
4-145
7. Install the firmwares by the following
procedure.
1) Connect the USB memory that
stored HyPAS application (FMU, etc.) to
the main body. Install the firmwares
from the application screen in the Sys-
tem Menu. (see the operation guide)
Confirm a kind of HyPAS application
displayed with an application screen
before HDD exchange, and install it
again.
2. Copy two kind of Multi Color Tables
(copiers and printers) from a USB mem-
ory by running U485.
3. Install the OCR dictionary software
from a USB memory by toggling power
on and off.
8. If backup data is saved by maintenance
mode U917, execute import of the
backup data by U917. (Refer P.6-244)
IMPORTANT
When installing the HDD (a), hold it without
touching the PWB side (b) to avoid damage.
Figure 4-215
14j0303
To Next Page
Loading...
