Kyocera TASKalfa 8002i - Page 122

2NJ/2RK
2-73
7. Open the document processor.
8. Remove two screws (a) (M4x8) and then detach the ISU right cover (b) in the direction of the arrow.
Figure 2-140
9. Remove two pins (a) (M4x6) and then detach the glass front cover (b) by sliding in the direction of the arrow.
Figure 2-141
10. Remove the ISU front cover (b) in the direction of the arrow.
Figure 2-142
a
b
a
a
b
a
b