2NJ/2RK
2-91
8. Take out cutting the separator cover (b) of the right upper cover (a) with nippers, etc.
9. Insert one nut(d) in the back side of the right upper cover (a).
10. Hang the hook(f) of the tray stay(e) on the aperture.
11. Attach the tray stay (e) to the right upper cover (a) with one screw(g)(M4×14).
*: While pressing the rear side of nuts(h), fasten the screw not to fall it.
Figure 2-174
12. Reattach the right upper cover (a) to the main unit in the original position, fix with one screw (b) (M4×8).
Figure 2-175
e
g
a
a
b
c
d
h
g
f
b
a
To Next Page
Loading...
