2NJ/2RK
2-127
9. Inside out the bottom frame (a), reattach the edg-
ing saddle (c) to the rear frame (b) and then pass
through the cassette heater wire (d).
10. Reattach the bottom frame (a) in the original posi-
tion.
*: Do not insert the frame film A (e).
Pass through the lower side of the stay frame (f).
Figure 2-239
11. Reverse upper and lower parts of side multi tray.
12. Insert the claw (d) of the frame film A (c) into the
aperture (b) of the frame film B (a).
Figure 2-240
a
c
f
b
d
e
a
c
b
b
d
d
To Next Page
Loading...
