Kyocera TASKalfa 8002i - Page 209

2NJ/2RK-1
2-160
When IB-35 is installed, remove it by the following procedure (steps 6 to 10). Other than that, go to step 11.
13. Remove the screw (a)(M3x8).
14. Detach the IF lid (b) in the direction of the arrow.
Figure 2-285
15. Remove the screw (a)(M3x6) that secures the
PWB unit (b).
Figure 2-286
b
a
14j0403
b
a
a
14j0404