EasyManua.ls Logo

Kyocera TASKalfa 8002i

Kyocera TASKalfa 8002i
1627 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2WA/2NJ/2RK
1-2
Output Tray
Capacity
Left lower
tray
275 sheets (64 g/m
2
)
250 Sheets (80 g/m
2
)
Left upper
tray
110 sheets (64 g/m
2
)
100 Sheets (80 g/m
2
)
Right tray 70 sheets (64 g/m
2
, 80 g/m
2
)
Image Write System Semiconductor laser and electrophotography
Light source LED array
Scanning method Flat surface scanning by the CCD image sensor
Photoconductor a-Si drum (diameter 40mm)
Charging system Contact charger roller method
Developer system Touch down developing system
Developer: 2-component
Toner replenishing: Automatic from the toner container
Transfer system Transfer belt + roller system
Separation system Small diameter separation + separation needle
Cleaning system Drum Counter blade + cleaning roller
Primary
transfer
Fur brush cleaning + Pre-brush system
Charge erasing system Exposure by cleaning lamp (LED)
Fusing system Sliding IH fuser system
Heat source: IH, halogen heater (press roller)
Abnormally high temperature protection devices: thermostat
Memory 4.0 GB
Large capacity storage SSD 8 GB / Hard Disk 320 GB
Interface Standard USB Interface Connector: 1 (Hi-Speed USB) *3
Network interface: 1
(10 BASE-T/100 BASE-TX/1000 BASE-T (IPv6, IPv4, IPSec), 802.3az supported)
USB Port: 4 (Hi-Speed USB)
Option eKUIO: 2
*2
Fax: 2*3
Wireless LAN: 1*4
Operating Envi-
ronment
Temperature 10 to 32.5°C/50 to 90.5°F
Humidity 10 to 80 %
Altitude 3,500 m/11,482 ft maximum
Brightness 1,500 lu×maximum
Dimension (W ×D ×H) 29.53" × 32.37" × 48.59"
750 ×822 ×1,234mm
Weight Approx. 330.7 lb / Approx. 150 kg/ (without toner container)
Items Description

Table of Contents

Other manuals for Kyocera TASKalfa 8002i

Related product manuals