2WA/2NJ/2RK
4-12
6. Release the hook (a) and remove the
PF separation pulley (b)(right) from the
shaft.
*: Check that the contact between the
paper feed pulley and separation pulley
is released.
7. Clean or replace the PF forwarding pul-
ley (right), PF paper feed pulley (right)
and PF separation pulley (right).
8. Reattach the PF forwarding pulley
(right), PF paper feed pulley (right) and
PF separation pulley (right) in the origi-
nal position of the primary paper feed
unit.
*: Attach them while checking the color of
the collar.
PF forwarding pulley (right) (Collar:
white)
PF paper feed pulley (right) (Collar:
white)
PF separation pulley (right) (Collar:
black)
Figure 4-9
9. When replacing the PF forwarding pul-
ley (right), PF paper feed pulley (right)
and PF separation pulley (right), exe-
cute U903 (Jam counter clear). (Refer
P.6-238)
10. Execute "Maintenance counter – cas-
sette –cassette counter clear" in main-
tenance mode U251 (Maintenance
counter set/clear). (Refer P.6-147)
To Next Page
Loading...
