2WA/2NJ/2RK
4-40
6. Pull the drum cover (a) towards you
toremove it from the rear drum cover
arm (b).
7. Clean the drum cover (a) and reattach
the parts in the original position.
Figure 4-49
Reattaching the drum cover
1. Insert the axle at the end of the drum-
cover (a) into the hole at the rear drum
cover arm (b).
*:Be sure to insert the fixing pin (c) into the
guiding chase at the back of the drum
cover (a).
2. In the same way, insert the fixing pinat
the front through the opening at the
front drum cover arm into the guiding
chase, fixing it using the drum cover fix-
ing pin (c).
*:After fixing, confirm that the drum cover
fixing pin (c) won’t drop by pulling it
straight backwards.
Figure 4-50
a
b
To Next Page
Loading...
