Kyocera TASKalfa 8002i - Page 386

2WA/2NJ/2RK
4-58
16. Reattach the PF primary paper feed
unit (a) in the original position.
*: To reassemble, press and hold the
retard release lever (c) at the bottom (b)
of the PF primary paper feed unit.
*: When reattaching the unit, align the pin
(d) at the rear side shaft to vertical and
insert it into the coupling (e).
*: Connect both upper and lower connec-
tors in the matching connectors.
Upper: white / lower: blue
Figure 4-77
b
a
c
d
a
a
e
14j0098