Kyocera TASKalfa 8002i

2WA/2NJ/2RK
4-91
5. Open the PF conveying cover (a).
6. Remove the strap (b) and then remove
the PF conveying cover (a).
Figure 4-131
7. Remove the rear right cover and rear
lower cover.
8. Pull out the conveying unit.
9. Release two hooks using a flat blade
screwdriver (a) and then remove the
interface cover (b).
10. Remove five screws (d)(M4x8) of the
right lower rear cover (c).
11. Remove the right lower rear cover (c).
Figure 4-132
b
b
a
14j0208
c
b
a
b
d
d
14j0209