Kyocera TASKalfa 8002i

2WA/2NJ/2RK
4-138
5. Remove the connector (a) and the
band (b) of the PF paper feed motor.
6. Remove the connector (YC15) from the
PF main PWB (c) and then release the
wire from two wire saddles.
Figure 4-204
7. Remove four screws (a)(M4x8) and
remove the PF drive unit (b).
8. Check or replace the PF drive unit (b)
and then reattach the parts in the origi-
nal position.
Figure 4-205
<&
a
b
c
d
c
14j0277
a
b
a
a
a
a
a
a
14j0278