2WA/2NJ/2RK-1
4-140
*: When reattaching the rear left cover (c),
latch three lower hooks (a) and then
latch three upper hooks (b) while sliding
in the direction of the arrow.
Figure 4-208
3. Remove one screw (a)(M2).
4. Remove the SSD (b) from the connec-
tor (c).
*: Use a Phillips 1 screwdriver and take care
not to damage the screws.
*: This screw is exclusive. Please do not fix
SSD (b) with screws other than the items
below
(7BB000204H BIND M SCREW 2x4)
IMPORTANT
To avoid damage when attaching the SSD (b),
align the screw hole (d) to the positioning boss
(e).
Do not replace the main PWB, engine PWB
and SSD at the same time.
Figure 4-209
a
b
e
d
c
14j0300
To Next Page
Loading...
