2WA/2NJ/2RK
4-255
*:If replaced at check, return to the original maintenance at the next maintenance. If not replaced at check, check again at the next maintenance.
10 PULLEY SUB EJECT 303NB24311 CL CL: Alcohol or dry cloth
x4 3NB24311
11 STATIC ELIMINATOR EJECT 63212210 CH CH; Remove if there is paper dust at the end of brush.
63212210
12 STATIC-ELIMINATOR EJECT CENTER 303NB36500 CH CH; Remove if there is paper dust at the end of brush.
3NB36500
13 STATIC-ELIMINATOR EJECT SIDE 303NB36490 CH CH; Remove if there is paper dust at the end of brush.
x2 3NB36490
14 STATIC-ELIMINATOR SUB EJECT 303NB24300 CH CH; Remove if there is paper dust at the end of brush.
3NB24300
C <Sensors>
1 SENSOR OPT 7NXPS133GD1+H0
1
CL CL: Air blowing
x2
2 SENSOR OPT 7NXSG2A141++H01 CL CL: Air blowing
x16
3 SENSOR OPT 7NXSG2A241++H01 CL CL: Air blowing
4 SENSOR A, SEPARATION 303H327460 CL CL: Air blowing
3H327460
5 SENSOR OPT 7NXKB1281AA2H01 CL CL: Air blowing
6 SENSOR OPT 7NX-
PSR11GD6FH01
CL CL: Air blowing
Parts name Parts No.
PM maintenance (x1000 counts) Remark
Set up User call *
*Based on the main
installation
Please do not use spray containing flammable gas for air-blow or air-brush purposes.
To Next Page
Loading...
