2WA/2NJ/2RK
6-42
Contents
Changes the printable area when copyng with Folio paper.
Purpose
Setting the actual size of Folio to use prevents the image dropout at the trailing edge or right/left
edges.
Method
1.Press the [Start] key.
2.Select the item to set.
3.Change the setting value by using [+] [-] key or the numeric keypad.
4.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U035 Folio size setting
(Message: Adjust Folio Size)
Items Contents Setting
range
Data
variation
Initial
setting
Length Sets the Folio paper length. 330 to 356
(mm)
1(mm) 330
Width Sets the Folio paper width. 200 to 220
(mm)
1(mm) 210
To Next Page
Loading...
