Kyocera TASKalfa 8002i

2WA/2NJ/2RK-1
6-70
Description
Sets the operation check of the original size detection and detection threshold
Purpose
Changes the detection threshold if the original size is often mis-detected with entirely dark origi-
nals (high density) and the only edge dark originals.
Setting
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Execution: Data1/Data2
1.Place an original copy on the table, close the original copy cover or document processor.
2.The light source is turned on and the CCD sensor detects the original width. The original size
sensor(OSS) judges the original lengthwise. (Detect twice when the document processor is
installed)
U099 Original size detection setting
(Message: Set Original Size Detection)
Items Contents
Data1 Display of the original width of RGB each three color
B/W Level1 Original size detection threshold setting
Data2 Display of the original width of RGB each three color (when the docu-
ment processor is installed)
Items Contents
Original Area(dot) Detected number of pixels (dot) in the original width
Original Area(mm) Detected the original width (mm)
Size SW L ON/OFF display of the original length sensor (0: Off/1: On)