Kyocera TASKalfa 8002i

2WA/2NJ/2RK
6-92
Contents
Displays/changes the developer bias set values or sets high altitude mode.
Purpose
Execute to check/change the developer bias set values.
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Setting: Sleeve DC
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Setting: Sleeve AC
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
U140 Developer bias adjustment
(Message: Adjust Developing Bias)
Items Contents
Sleeve DC Set the developer sleeve roller DC bias.
Sleeve AC Set the developer sleeve roller AC bias.
Mag DC Set the developer magnet roller DC bias.
Mag AC Set the developer magnet roller AC bias.
Sleeve Freq Set the developer sleeve roller frequency.
Sleeve Duty Set the developer sleeve roller duty.
Mag Duty Set the developer magnet roller duty.
AC Calib Execute and set AC Calibration
Image Preference Sets the toner density
Lead Density Fuser separation failure measure setting
Items Contents Setting range Data
variation
Initial
setting
K Black developer sleeve DC bias setting 0 to 255 - 82
Items Contents Setting range Data
variation
Initial
setting
K Black developer sleeve AC bias setting 0 to 255 - 151