2NJ/2RK
2-22
Modular cord connection
Connect a modular cord to the LINE connector of the main unit.
When using a commercially available telephone set, connect a modular cord to the TEL connector of the main unit.
1. Detach the main unit cover in order from the top.
Figure 2-36
2. Connect the modular code to the modular jack.
a. Modular jack (line1) *1
b. Modular jack (Phone)
c. Commercially available telephone
d. Modular jack (line2) *1
*1 when two FAX kits are installed
Figure 2-37
To Next Page
Loading...
