2WA/2NJ/2RK
6-148
Contents
Switch the operations and screens of the main unit according to the destination.
Purpose
Execute after initializing the backup RAM, in order to return the setting to the value before
replacement or initialization
Method
1.Press the [Start] key.
2.Select the item to set.
*1: 100 V model only, *2: Except 100 V model
* :Initial setting: Destination
3.Press the [Start] key.
* :Initializes according to the destination
4.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
* :An error code is displayed when an error occurs.
When errors occur, turn the power switch off then on, and execute initialization using mainte-
nance mode U252.
Error codes
U252 Destination
(Message: Set Destination)
Items Contents
Japan Metric *1 Japan metric specification
Inch *2 Inch specification
Europe Metric *2 Europe Metric specification
Asia Pacific *2 Asia Pacific specification
Australia *2 Australia specification
China *2 China specification
Korea *2 Korea specification
Items Contents
0001 Controller (Entity Error)
0002 Controller error
0020 Engine error
0040 Scanner error
To Next Page
Loading...
