2NJ/2RK
2-26
3. Release the lock of the paper width guides.
Figure 2-44
4. Adjust the position of the paper width guides.
Figure 2-45
5. Load paper.
Figure 2-46
Note
Load the paper with the print side facing up.
Before loading paper in the cassette, fan the paper taken from a new package to separate it. (P.2-24See page )
Before loading the paper, be sure that it is not curled or folded. Such paper may cause paper jams.
Make sure that the loaded paper does not exceed the level indicator (see the illustration above).
If paper is loaded without adjusting the paper length guide and paper width guides to the paper size to use, the paper
may skew or become jammed.
To Next Page
Loading...
