2WA/2NJ/2RK-2
6-167
Contents
Adjusts the margins for DP scanning.
Purpose
Make the adjustment if margins are incorrect
Adjustment
1.Press the [Start] key.
2.Press the [System Menu] key.
3.Place an original on the DP and press the [Start] key to make a test copy.
4.Press the [System Menu] key.
5.Select the item to adjust.
6.Change the setting value by using [+] [-] key or the numeric keypad.
* :When the setting value is increased, the margin widens, and it narrows when the setting
value is decreased.
Figure 6-22
7.Press the [Start] key to set the setting value.
U404 Adjusting margins for scanning an original from the docu-
ment processor
(Message: Adjust Scanning Margin(DP))
Items Contents Setting
range
Data
varia-
tion
Initial
setting
A Margin Adjusts the DP left margin 0.0 to 10.0 0.5mm 3.0
B Margin Adjusts the DP leading edge margin 0.0 to 10.0 0.5mm 2.5
C Margin Sets the DP right margin 0.0 to 10.0 0.5mm 3.0
D Margin Adjusts the DP trailing edge margin 0.0 to 10.0 0.5mm 4.0
A Margin(Back) Adjusts the DP left margin (2nd side) 0.0 to 10.0 0.5mm 3.0
B Margin(Back) Adjusts the DP leading edge margin
(2nd side)
0.0 to 10.0 0.5mm 2.5
C Margin(Back) Adjusts the DP right margin (2nd side) 0.0 to 10.0 0.5mm 3.0
D Margin(Back) Adjusts the DP trailing edge margin
(2nd side)
0.0 to 10.0 0.5mm 4.0
Leading edge margin
(4.0 +1.5/-0 mm)
Left margin
(4.0 mm or less)
Right margin
(4.0 mm or less)
Trailing edge margin
(2.5 +1.0/-1.0 mm)
To Next Page
Loading...
