Kyocera TASKalfa 8002i - Page 776

2WA/2NJ/2RK
6-183
Setting: C
1.Select the item to set.
2.By using [Left/Right cursor] keys or the numeric keys, enter the values which are shown on the
back page of the adjustment original.
3.Press the [Start] key to set the setting value.
Setting: M
1.Select the item to set.
2.By using [Left/Right cursor] keys or the numeric keys, enter the values which are shown on the
back page of the adjustment original.
3.Press the [Start] key to set the setting value.
Setting: Y
1.Select the item to set.
2.By using [Left/Right cursor] keys or the numeric keys, enter the values which are shown on the
back page of the adjustment original.
3.Press the [Start] key to set the setting value.
Setting: R
1.Select the item to set.
2.By using [Left/Right cursor] keys or the numeric keys, enter the values which are shown on the
back page of the adjustment original.
3.Press the [Start] key to set the setting value.
Items Contents Setting range Data
variation
Initial
setting
L L parameter setting 0.0 to 100 - 72.6
a A value setting -200 to 200 - -32.8
b B value setting -200 to 200 - -11.5
Items Contents Setting range Data
variation
Initial
setting
L L parameter setting 0.0 to 100 - 48.1
a A value setting -200 to 200 - 69.9
b B value setting -200 to 200 - -6.1
Items Contents Setting range Data
variation
Initial
setting
L L parameter setting 0.0 to 100 - 86.2
a A value setting -200 to 200 - -18.6
b B value setting -200 to 200 - 81.7
Items Contents Setting range Data
variation
Initial
setting
L L parameter setting 0.0 to 100 - 46.7
a A value setting -200 to 200 - 54.2
b B value setting -200 to 200 - 38.6