Kyocera TASKalfa 8002i - Page 790

2WA/2NJ/2RK
6-197
Setting: System
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Setting: Print
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Supplement
Test copy of the original is available by pressing the [System Menu] key as interruption copy
mode when executing this maintenance mode.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Items Contents Setting
range
Initial setting
Y Compression rate of the brightness 1 to 100 90(%)
CbCr Compression rate of the color difference 1 to 100 90(%)
Items Contents Setting
range
Initial setting
Luminance Compression rate of the brightness 1 to 10 7(%)
Chrominance Compression rate of the color difference 1 to 10 7(%)