2WA/2NJ/2RK
6-212
Contents
Sets the signal detection method for remote switching.
Change the setting according to the type of telephone connected to the main unit.
Purpose
Sets the remote switching conditions according to the user's telephone type, pRefer ence, etc.
Setting
1.Press the [Start] key.
2.Select [Remote Mode] and press the [Start] key.
3.Select the item to set.
* :Initial setting: One
4.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U620 FAX system
(Message: FAX System)
Items Contents
Remote Mode Setting the remote switching mode
Items Contents
One Sets the one-shot type detection
Cont Sets the continuous type detection
To Next Page
Loading...
