2WA/2NJ/2RK
6-214
Contents
Sets the FAX communication.
Purpose
Sets the following to correspond to field claims
Reducing the transmission time to improve the accuracy of reception when using a low quality
line
Improving the accuracy of communication during the international communication
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Setting: TX Speed
Sets the transmission speed of the sender. When the destination unit has the V.34 capability,
V.34 is selected for transmission regardless of this setting.
1.Select the communication speed.
* :Initial setting: 14400bps/V17
2.Press the [Start] key to set the setting value.
* :[Completed] is displayed.
Setting: RX Speed
Sets the reception capacity to advise the transmitter by the DIS/NSF signal. When the destina-
tion unit has the V.34 capability, V.34 is selected for transmission regardless of this setting.
1.Select the reception speed.
U630 Communication control 1
(Message: Communication Control 1)
Items Contents
TX Speed Sets the communication starting speed.
RX Speed Sets the reception speed.
TX Echo Sets the waiting period to prevent echo problems at the
sender.
RX Echo Sets the reception speed.
Items Contents
14400bps/V17 V.17 14400bps
9600bps/V29 V.29 9600bps
4800bps/V27ter V.27ter 4800bps
2400bps/V27ter V.27ter 2400bps
Items Contents
14400bps V.17, V.33, V.29, V.27ter
9600bps V.29, V.27ter
4800bps V.27ter
2400bps V.27ter (fallback only)
To Next Page
Loading...
