2NJ/2RK
2-33
5.Load paper.
Figure 2-60
Note
Load the paper with the print side facing up.
Before loading paper in the cassette, fan the paper taken from a new package to separate it. (P.2-24See page )
Before loading the paper, be sure that it is not curled or folded. Such paper may cause paper jams.
Make sure that the loaded paper does not exceed the level indicator (see the illustration above).
6.Insert the paper size and media type sheet(cassette 6 and cassette 7 only).
Figure 2-61
7.Insert slowly the cassette as far as it will go.
Figure 2-62
To Next Page
Loading...
