2WA/2NJ/2RK
6-255
Contents
Transfer the log files save in the HDD to a USB memory.
The data to be transferred includes a log and a panel display when acquiring logs.
Purpose
Transfer the log file saved in the HDD to a USB memory for investigation when a failure occurs.
Method
1.Check the LED display is off and turn the power switch off.
2.Insert a USB memory into the USB memory slot.
3.Turn the power switch on.
4.Enter maintenance item U952.
5.Select [Execute].
6.Press the [Start] key.
* :Starts transferring the log files saved in the HDD to a USB memory.
[Processing] is displayed. (About 3 to 5 minutes)
7.[Completed] appears after normal completion.
8.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
* :An error code appears when there is an error.
Supplement
How to retrieve the log when the operation panel freezes
Log obtainment is started when pressing three keys on the operation panel ([Statement check/
Job cancellation]+[system menu/ counter]+[Stop]) for 3 to 6 seconds.
The memory lamp is blinking during obtaining and turns off when completed.
The log retrieved this way can be saved in a USB memory.
Error codes
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U964 Log check
Items Contents
Execute Transfer the log file.
Display Contents
No USB Storage The USB memory is not installed
No File No file
Mount Error USB memory mount error
File Delete Error Failed to delete existing files in the USB memory
Copy Error HDD to USB memory copy failure
Unmount Error USB memory unmount error
Other Error Other error
To Next Page
Loading...
