2WA/2NJ/2RK
6-257
Contents
Refer /Change the information about CBM (condition based maintenance) in KFS.
Purpose
Refer /Change the counter, threshold and setting current value about CBM (condition based
maintenance)
Execution
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Execution: CBM Alert
1.Select the item to set.
* :The screen for setting is displayed.
Setting: Engine
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Setting: Scanner
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
U981 Setting/Checking of predictive maintenance alert data
(Message: Set/Check CBM Alert Data)
Items Contents
CBM Alert CBM Alert
Cassette Feed Timing Paper feed timing
Image Quality Background image/Thin density
DP Feed Retry DP paper feed retry
Scan Image Image vertical streak has entered
Items Contents
Engine Engine
Scanner Scanner
Items Contents Setting
range
Initial setting
Cassette Feed Timing Paper feed timing 0 to 1 0: (Off)
Retard Retard 0 to 1 0: (Off)
Image Quality Background image/Thin density 0 to 1 0: (Off)
Items Contents Setting
range
Initial setting
DP Feed Retry DP paper feed retry 0 to 1 0: (Off)
Scan Image Image vertical streak has entered 0 to 1 0: (Off)
To Next Page
Loading...
