Kyocera TASKalfa 8002i - Page 854

2WA/2NJ/2RK-1
6-261
Setting: Thin Concentration
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Setting: Retry Setting
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Method: Calibration
1.Select the item to set.
* :The screen for setting is displayed.
Setting: Dot Cnt
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key and then fix the setting value.
Setting: Developing Time
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Items Contents Setting
range
Initial setting
K CTD value K 0 to 255 228
Items Contents Setting
range
Initial setting
Value Retry number 0 to 255 1
Developing Refresh Developing Refresh at a retry 0 to 1 1
Existence Retry existence or not 0 to 1 1
Items Contents
Dot Cnt Dot counts when a calibration was succeeded last time
Developing Time Developing driving time when a calibration was succeeded last time
Items Contents Setting
range
Initial setting
K Black 0 to 999999 0
Items Contents Setting
range
Initial setting
K Black 0 to 999999 0